2. Components and Functions
Place on which a disk is put
2 Access lamp
The access lamp operates as shown in the table below under the power-on status
3 Eject button
Press this button to eject a disk into or from the product.
（The button does not operate if the power of the product is OFF or the relevant program
prohibits it from operating.)
4 Manual emergency ejecting hole
Insert a pin (such as a clip extended straight) into this hole to eject the tray manually.
(The hole is provided to eject the tray manually when the eject button and the relevant software are
not available for the ejection.)
1 SATA power connector
2 SATA interface connector
Lit or Blinking