Miele Vacuum cleaners Operating Instructions Manual page 11

Fitting the floorhead a
^ Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
Removing the floorhead b
^ To release the handle from the
suction tube, press the release
button and pull the handle away from
the suction tube.
Adjusting the floorhead c
The floorhead can be used for all
normal cleaning of carpets and rugs. It
can also be used with the brush
protruding to vacuum hard flooring.
It is important to observe the flooring
manufacturer's cleaning and care
instructions.
Vacuum carpets and rugs with the
brush retracted.
^ Press the foot control %.
Clean hard flooring which is not
susceptible to scratching with the brush
protruding.
^ Press the foot control ).
Clean flooring which has deep
crevices or grooves with the brush
protruding.
Preparing for use
11