Removing The Control Panel; Replacing The Thermostats; Replacing The Flap-Operated Thermostat - Electrolux 4-Door Refrigerator with R600a Service Manual

In order to access the components fitted to the control panel,
proceed as follows:
•
press the light switches (in the upper and lower sections
of the control panel), and rotate 45°;
•
remove the 5 screws which secure the control panel mask
in position;
•
remove the mask starting from the lower edge;
remove the two screws which secure the control panel to
the cabinet and remove the control panel by rotating
downwards.
When re-assembling, it is important to ensure that the sealing
gasket is correctly positioned between the control panel and
the mask.
The refrigerator thermostat is encased. Simply pull the thermostat from the tube containing the capillary. To
remove the freezer thermostat, it is necessary to access the evaporator battery and straighten the capillary in
order to pull it out.
It is necessary to detach the thermostat bulb and loosen the two screws which secure the thermostat to the
compartment wall.
4 DOOR REFRIGERATOR WITH R600a

7.2. Removing the control panel

7.3. Replacing the thermostats

7.4. Replacing the flap-operated thermostat

19/22