Back View And Ports - Pioneer DVR-A06 Operating Instructions Manual

4.2 Drive Back View and Ports
DVR-A06/106 Back View
6) Audio Output
connector for analog audio output, uses a Modex 70553 connector
Select the appropriate cable using the following chart:
Pin Name
1 L
2 G
3 G
4 R
7) Device Configuration Jumper
Turn OFF the unit then set this jumper switch to select the drive use mode
supporting the computer (jumpered = ON; no jumper = OFF)
Pin Name
1 MA*
2 SL
3 CS
4
5
* Pin #1 is active when shipped from the factory.
8) Host IDE Interface
40-pin I/O connector in accordance with ATA specifications
9) DC Input
power supply input for DC +5 V and +12 V
Pin Name
1 +12
2 G
3 G
4 +5
Function
Left channel audio output
Ground
Ground
Right channel audio output
Function
on Drive set to Master
on Drive set to Slave
on Drive set to Cable Select
Reserved
Reserved
Function
Power supply input for DC +12 V
Ground
Ground
Power supply input for DC +5 V
- 7 -
DVR-A06 / DVR-106 Operating Instructions