Siemens HiPath 500 Operating Instructions Manual page 66

Conducting calls – enhanced functions
Step by Step
> <
Open door?
c or d Press and hold down the Talk key or press the Speaker-
> <
Service?
> <
* 61=Open door?
c or d Press and hold down the Talk key or press the Speaker-
> <
Service?
> <
* 89=Door release
ON?
58
o
Enter the internal phone number for the door opener.
You are connected to the door opener.
Using the handset to open the door opener during
a call
[
Select the menu item and confirm.
Using the handset to open the door opener without
holding a conversation
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the internal phone number for the door opener.
The door is opened.
a Press the On-hook key to end the process.
Activating the door release
This function only works if it has been configured by the
service engineer.
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Follow the user guidance system from this point
onwards. Enter the internal phone number of the door
opener, as well as the code and type of door release:
• 1=enable with ring,
• 2=enable w/o ring,
• 3=change password.
[
Confirm your entries.
a Press the On-hook key to end the process.