Call Charge Display - Siemens HiPath 500 Operating Instructions Manual
In hipath cordless office
Hide thumbs
Also See for HiPath 500:
- Operating instructions manual (236 pages) ,
- User manual (142 pages) ,
- Operating manual (106 pages)
Table of Contents
Advertisement
Conducting calls – enhanced functions
Step by Step
c or d Press and hold down the Talk key or press the Speaker-
> <
Service?
> <
* 65=Show call
charges?
56
Call charge display
After a call has ended, the display shows the connec-
tion charges for the current call as standard. If the costs
are to be displayed continuously during an outgoing call,
this function must be requested from the carrier.
Note:
If a call is transferred, the costs are assigned to
the telephone to which the call was transferred
from this point onwards.
You can check and display the call charges for your
phone number as a total for a period that can be set by
the service engineer.
First the call charges for the last charged call are dis-
played. The total call charges are displayed after five
seconds.
This function can also be called by entering the code
(
page 104).
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
a Press the On-hook key to end the process.
Hide quick links:
Advertisement
Table of Contents
