Control Settings; Wash Cycle Selections - GE GLDT690 Series Owner's Manual

About the dishwasher control panel.
1

Control Settings

1
ON/OFF
With door open, press ON/OFF button to turn the unit ON to begin operation and OFF at the end of a wash cycle.
The ON/OFF light is displayed when the dishwasher is ON.
2

Wash Cycle Selections

Press SELECT button to choose wash cycle. The light under the cycle name will display to indicate which cycle has been selected.
NOTE: All cycle times and water usage information contained in this section are approximate values. Actual results will depend
on several factors including, but not limited to, inlet water temperature and household water pressure.
SANITIZE 4.82 gal., 130 minutes
HEAVY 6.74 gal., 125 min.
NORMAL 4.65 gal., 115 min.
LIGHT 4.82 gal., 78 min.
GLASSES 3.89 gal., 76 min.
SPEED 5.75 gal., 78 min.
RINSE 1.92 gal., 26 min.
6
3
4
6
This cycle is meant to sanitize dishes and glasses with added heat. If you select sanitize cycle, at the end of
this cycle, the sanitized indicator will turn on .
This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This
cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.
This cycle is meant for loads of everyday dishes, glasses and cookware with medium soils that have not been pre-
rinsed.
This cycle is meant for loads of everyday dishes, glasses and cookware with light soils that have been pre-rinsed.
This cycle is meant for lightly soiled glassware. This cycle has less heating during the wash and rinse to protect
your glassware. This cycle also has a lower temperature heated dry.
This cycle is meant for loads of everyday dishes, glasses and cookware with medium soils that have not been pre-
rinsed. This cycle features reduced wash times to allow for faster cycle completion. This cycle also has a reduced
time heated dry.
For rinsing partial loads that will be washed later. Do not use detergent with this cycle. This cycle does not include
heated dry.
2
6