Updating Firmware; Required Tools; Operation Procedures; Dsp P.c.b - Yamaha RX-V363 Service Manual
Av receiver
Hide thumbs
Also See for RX-V363:
- Owner's manual (200 pages) ,
- Owner's manual (71 pages) ,
- Owner's manual (78 pages)
Table of Contents
Advertisement
I UPDATING FIRMWARE
After replacing the following parts, be sure to write the latest firmware.
• DSP P.C.B.
• IC201 (DSP P.C.B.)
G Required Tools
•
DVD or CD player (with DIGITAL OUTPUT (OPTI-
CAL or COAXIAL) jack)
•
Optical cable (when OPTICAL jack is used)
•
Digital audio pin cable (when COAXIAL jack is used)
•
Firmware CD
*
To make the firmware CD, download the latest
firmware from the specified download source to
PC.
Example of connection between digital OPTICAL jacks
This unit
Example of connection between digital COAXIAL jacks
This unit
Optical cable
Digital audio pin cable
Fig. 1
G Operation Procedures
1. Connect this unit and DVD/CD player as shown be-
low. (Fig. 1)
DVD/CD player
DVD/CD player
RX-V363/HTR-6130
17
Hide quick links:
Advertisement
Table of Contents
