Assembly Hints - Nokia 5730 Xpress Music Service Manual

Hide thumbs Also See for 5730 Xpress Music:
Table of Contents

Advertisement

11. ASSEMBLY HINTS

1) When placing the QWERTY DOMESHEET make sure
that these holes are aligned.
3) When assembling the other end of the DYNAMIC
FLEX make sure that the connector goes under the
two clips shown. Connect the connector and then
press the FLEX SLIDER into the correct place so that
the small gap is facing the DYNAMIC FLEX.
5) Tighten the screws to the torque of 16 Ncm in
the order shown. After tightening the first screw
close the slide a bit until the two screw holes
become visible (small image). Tighten the two
TORX+ size 4 screws.
19
2) First push the DYNAMIC FLEX with the SS-93 into
place against the FLEX PLANE as shown. Next,
connect the connector to the PWB. Then slide the
FLEX PLANE into the gap and fasten the small clip.
4) Tighten the screw to the torque of 16 Ncm.
6) Tighten the five TORX+ size 4 to the torque of 20
Ncm in the order shown.
Confidential  Copyright © 2009 NOKIA  All rights reserved
Nokia 5730 XpressMusic RM-465
Service Manual Level 1&2
Version 1.0
ISSUE 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-4655730 xpressmusic

Table of Contents