Service Mode - Sony ICF-CD2000 Service Manual

Fm/sw/mw cd clock radio
Hide thumbs Also See for ICF-CD2000:
Table of Contents

Advertisement

Service Mode (Service program)
The equipment is provided with a service program built in the
microcomputer, like conventional models.
Service program operation methods are described in the follow-
ing.
• Step 1 (Service mode setting methods)
1. Connect TP447 (CD TEST 2) to the TP444 (GND).
2. Turn ON the S423 (CD OPEN switch).
3. Insert external power supply.
4. Connect TP453 (RESET) to the TP444 (GND) to make open.
(Reset)
• Step 2 (Operation in the service mode)
1. Once the service mode is effected, the LCD displays 18 indi-
cations each of which is repeatedly displayed.
2. By pressing the
or
>
able inwardly or outwardly. However, if this is activated, track-
ing servo and sled servo are turned OFF, so it can be turned
[BAND]
ON by pressing the
3. Without disk, focus searching is repeated continuously.
[BAND]
4. By pressing the
CLV-A (servo in PLAY) are turned ON. Then playing begins.
No muting is ON in the service mode.
• Step 3 (Resetting of service mode)
1. Remove external power supply.
2. Disconnect TP447 (CD TEST 2) and TP444 (GND), and also
TP453 (RESET) and TP444 (GND).
– LCD Board (Component Side) –

SERVICE MODE

key, the optical pick-up is mov-
.
key if required.
key, tracking servo, sled servo and
TP444
(GND)
TP453
(RESET)
Fig. 3 Location of CD TEST terminal
SECTION 4
TP447
(CD TEST 2)
– 11 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icf-cd2000sD-e551Cdm-2911ebaDax-11e

Table of Contents