1: Attaching The Table-Top Stand - Sony BRAVIA KDL-55HX750 Operating Instructions Manual

1: Attaching the
Table-Top
Stand
Refer to the supplied Table-Top Stand leaflet for
proper attachment.
1
Place the TV set on the Table-Top Stand.
KDL-55/46/40/32HX75x,
KDL-46/40/32EX65x, KDL-32EX550
Guide
pins
~
• Align the TV from the top, slide it in until the
guide pins cannot be seen.
KDL-26EX550
2
Fix the TV to the Table-Top Stand using the
supplied screws. The arrow marks
indicate the location of the screw holes used
for securing the Table-Top Stand.
KDL-55/46/40/32HX75x,
KDL-46/40/32EX65x, KDL-32EX550
KDL-26EX550
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
Detaching the Table-Top
Stand from the TV
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 2.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
GB
7
GB