Damper Duct Assembly - GE GBSC0 Technical Service Manual

Damper Duct Assembly

Model PFSF2
A motorized damper duct assembly is used to
control airfl ow from the freezer into the fresh food
compartment. It is located on the back wall of
the fresh food compartment, behind the fruit and
vegetable crisper drawers. The damper assembly
consists of a 12-VDC motorized damper sealed
inside the styrofoam damper duct, inlet and outlet
gaskets, and a plastic cover. The assembly is held
in place with one 1/4-in. hex-head screw at the top,
and 2 pins at the bottom that fi t into the liner.
To remove the fresh food damper:
1. Remove the fruit and vegetable crisper drawers
and the crisper drawer cover and frame
assembly.
Caution: The glass inserted in the crisper drawer
cover and frame may easily separate. Care should
be taken when removing the crisper drawer cover
and frame assembly.
2. Remove the 1/4-in. hex-head screw from the top
of the damper cover.
Damper Cover
Pin
3. Tilt the damper assembly toward the front of the
4. Disconnect the damper motor wire harness.
Wire Harness
5. Separate the damper duct from the damper
Pin
– 42 –
refrigerator, then pull up the damper assembly.
cover.
Damper Duct
(Continued next page)