Using Your Egg Cooker; How To Use - Dash Go Rapid Egg Cooker Welcome Booklet

Using Your Egg Cooker

welcome booklet
Directions
The Egg Cooker will automatically turn on when plugged in and will turn off
after all the water has evaporated from the Heating Plate.
1.
Remove the Lid.
2.
Use the Measuring Cup to place the appropriate amount of clean water
into the Egg Cooker.
3.
Pierce the larger end of each egg with the pin attached to the bottom of
the Measuring Cup.
4.
Attach the Egg Tray handle to the Egg Tray. Place an egg in each designat-
ed spot in the Egg Tray.
5.
Make sure that the holes in the larger end of the eggs are pointed
upwards. Do not let the eggs touch the Heating Plate.
6.
Cover with the Lid and plug Egg Cooker in.
7.
When the light turns off, the eggs will be cooked. Actual cooking time will
depend on number of eggs and desired consistency (see Cooking Time).
8.
Remove eggs after the automatic shut off.
9.
Run cool water over the eggs before eating them.
Enjoy your eggs!
9