Assembly; Know Your Air Compressor - Husky 671-049 Operator's Manual

KNOW YOUR AIR COMPRESSOR

See Figure 2.
The safe use of this product requires an understanding of the information on the product and in this operator's manual as well
as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and
safety rules.
HANDLE
The air compressor is equipped with a padded carrying handle
for ease of use.
OIL-FREE INDUCTION MOTOR
Your air compressor features permanently lubricated bearings.
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of air
being delivered through the hose.
ATTACHING HOSE
See Figure 3.
g Make sure the air compressor is off and unplugged.
Set up instructions:
1. Compressor is assembled at factory and ready for
use. Check all components to ensure secure assembly,
ie., rubber feet, wheels, handle, quick connects, gages,
safety valve, air filter, drain valve, etc.
2. Apply thread tape to threaded connections of hose,attach
quick coupler to hose with a wrench (wrench is not
provided).
3. Apply thread tape to threaded connections of male
plug, attach male plug to hose with a wrench (wrench is
not provided).
g Rotate pressure regulator knob fully counterclockwise.
g Insert hose adapter end of air hose into female coupler end
in air compressor.
FEATURES
PRESSURE RELIEF VALVE
The pressure relief valve is designed to automatically release
air if the air receiver pressure exceeds the preset maximum.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating the
pressure regulator knob.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air in
the tank.

ASSEMBLY

HOSE ADAPTER
END
Page 9
FEMALE COUPLER
PRESSURE REGULATOR KNOB OFF
Figure 3