Using A Wall-Mount Bracket; Installing The Tv Against A Wall Or Enclosed Area - Sony Bravia KDL-55W900A Operating Instructions Manual

Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see
page 11 (Detaching the Table-Top Stand
from the TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
• The length of the screw for Wall-Mount
Bracket differs depending on the
mounting hook thickness. Please see
below illustration.
8-12 mm
Screw
Mounting Hook
Hook attachment on rear of
TV set
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
~
• Read the supplied Safety Booklet for
additional safety information.
Installing the TV
against a wall or
enclosed area
Make sure that your TV has adequate
ventilation. Allow enough space around the
TV as shown in the illustration.
Installed with stand
7
11 / inches
8
(30 cm)
4 inches
(10 cm)
Leave at least this much space around the set.
Installed on the wall
11
4 inches
(10 cm)
4 inches (10 cm)
Never install the TV set as follows:
Air circulation is blocked.
Wall
~
• Inadequate ventilation can lead to
overheating of the TV and may cause
damage to your TV or cause a fire.
3
2 / inches
8
4 inches
(6 cm)
(10 cm)
7
/ inches
8
(30 cm)
4 inches
(10 cm)
Leave at
least this
much space
around the
set.
Air circulation is blocked.
Wall
21