Allows you to set up a conference with nine other parties on or off
To Activate: 1. With a call in progress, press the Confrn
Softkey. This opens a new line while placing
the other party(ies) on hold.
2. Place a call to another party.
3. When the call connects, press Confrn again to
add this party to the call.
4. Repeat the first three steps to add another
Special Note: To abandon the addition of a
conferee, press the End Call Softkey, which
disconnects that leg of the conference and places the
other conferees on hold.
With Cisco phones you have several different options for placing a
This will automatically dial the last called number from your
Allows you to place a call on hold.
To Return to the call: Press the Resume Softkey.
Lift handset and dial the number.
Dial the number you want to call and either
pick up the handset which then initiates the
call or press the Dial Softkey (on a 7960
only) and this initiates the call on the
speakerphone if the handset is NOT picked
Press the Speaker button and then dial
(NOT offered on 7912 set).
Lift handset and press the Redial Softkey.
During a call, press the Hold Softkey.