Assembly Instructions; Solder Components - Nokia C7-00 Service Manual

10. ASSEMBLY INSTRUCTIONS

For assembly, you will need the Nokia Standard
Toolkit version 2, and the RF connector assembly tool
SS-231.
2) Press the shielding lid down gently with the SS-93
to attach it to the ENGINE BOARD.
4) When inserting the CAMERA MODULE, check that
the shown clip is on the same side as the guiding
notch.
21
1) Place the IMAGING PROCESSOR SHIELDING LID with
the tweezers.
3) Place the CAMERA MODULE with the tweezers.
5) Press the CAMERA MODULE down carefully with the
SS-93 to attach the camera retaining clips.
Confidential | Copyright © 2010 Nokia | All rights reserved
Nokia C7-00
RM-675
Service Manual Level 1&2
Version 2.0