2-48 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Put [A] the projection [B] on the reserve tank into the hole
[C] on the frame bracket, and place the reserve tank on
the right side of frame.
Place a container under the water pump drain bolt [A],
then remove the drain bolt.
Remove the radiator cap [A] in two steps. First turn the
cap counterclockwise to the first stop. Then push and turn
it further in the same direction and remove the cap.
The coolant will drain from the radiator and engine.
Turn over [A] the reserve tank, remove the cap, and pour
the coolant into a suitable container.
Place the reserve tank on the right side of frame.
Tighten the drain bolt with the gasket.
Replace the drain bolt gasket with a new one.
Torque - Water Pump Drain Bolt: 7.0 N·m (0.70 kgf·m, 92