16-64 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
•
If the oscillator is not available, the tachometer can be
checked as follows.
○
Connect the 12 V battery and terminals in the same man-
ner as specified in the "Liquid Crystal Display (LCD) Seg-
ments Check".
○
Using an auxiliary wire, quick open and connect the ter-
minal [2] to the terminal [6] repeatedly.
○
Then the tachometer needle [A] should flick [B].
If the needle does not flick, replace the meter assembly.
Indicator Lights Inspection
•
Connect the 12 V battery and terminals in the same man-
ner as specified in the "Liquid Crystal Display (LCD) Seg-
ments check".
Neutral Indicator Light (LED) [A]
FI Indicator Light (LED) [B]
Oil Pressure/Water Temperature Warning Indicator Light
(LED) [C]
Right Turn Signal Indicator Light (LED) [D]
Left Turn Signal Indicator Light (LED) [E]
High Beam Indicator Light (LED) [F]
Fuel Level Warning Indicator Light (LED) [G]
•
Using the auxiliary leads, connect a 12 V battery to the
meter unit connector as follows.
Water Temperature Warning Indicator Light (LED)
Battery Negative (–) Terminal to Terminal [7]
Oil Pressure Warning Indicator Light (LED)
Battery Negative (–) Terminal to Terminal [8]
Comments to this Manuals
Latest comments: