Meter, Gauge, Indicator Unit
When the terminals are connected, all the LCD segments
[A] and LED warning lights [B] appear (FI warning light
appear for two seconds).
If the LCD segments and LED warning lights will not ap-
pear, replace the meter assembly.
Disconnect the terminal .
All the LCD segments and LED warning light disappear.
If the segments do not disappear, replace the meter as-
MODE AND RESET BUTTON Operation Check
Connect the 12 V battery and terminals in the same man-
ner as specified in the "Liquid Crystal Display (LCD) Seg-
Check that the display change to the CLOCK, ODO, TRIP
A and TRIP B displays each time the MODE button [A] is
If the fuel level gauge flashed, display change to CLOCK,
ODO, TRIP A , TRIP B and FUEL.
If the display function does not work, replace the meter
Indicate the clock mode.
Check that when the RESET button in CLOCK mode is
pushed for more than two seconds, the meter display
turns to the clock set mode.
Both the hour and minute display start flashing.
ELECTRICAL SYSTEM 16-61