Torque - Rear Engine Mounting Nuts: 44 N·m (4.5 kgf·m, 32
Font Engine Mounting Bolts: 44 N·m (4.5 kgf·m,
Engine Mounting Bracket bolts: 25 N·m (2.5 kgf·m,
Install the engine sprocket (see Engine Sprocket Installa-
tion in the Final Drive chapter).
Run the leads, cables, and hoses correctly (see Cable,
Wire, and Hose Routing section in the Appendix chapter).
Install the removed parts (see appropriate chapters).
Throttle Cables (see Throttle Control System Inspection
in the Periodic Maintenance chapter)
Clutch Cable (see Clutch Operation Inspection in the Pe-
riodic Maintenance chapter)
Drive Chain (see Drive Chain Slack Adjustment in the
Periodic Maintenance chapter)
Fill the engine with engine oil (see Engine Oil Change in
the Periodic Maintenance chapter).
Fill the engine with coolant and bleed the air from the cool-
ing system (see Coolant Change in the Periodic Mainte-
Adjust the idling (see Idle Speed Adjustment in the Peri-
odic Maintenance chapter).
ENGINE REMOVAL/INSTALLATION 8-7