Engine Oil (drain, see Engine Oil Change in the Periodic
Clutch Cover (see Clutch Cover Removal)
Clutch Spring Bolts [A]
Clutch Spring Plate [B] (with thrust bearing and pusher
Friction Plates, Steel Plates
Clutch Hub Nut [A]
Holding the clutch hub [B], remove the nut and washer.
Special Tool - Clutch Holder [C]: 57001-1243
Remove the oil pump sprocket boat [A].
The oil pump sprocket bolt has a left-hand threads.
Using the hole [B], pull out the sleeve [C].
Remove the following as a set.
Clutch Housing [D]
Oil Pump Chain [E]
Oil Pump Sprocket [F]
Unscrew the bolts [A] and remove the oil pump chain
Apply a non-permanent locking agent to the oil pump
chain guide bolts and tighten them.
Torque - Oil Pump Chain Guide Bolts: 12 N·m (1.2 kgf·m,
Put the oil pump chain [A] on the clutch housing gear [B]
and the oil pump sprocket [C].