Apply molybdenum disulfide oil solution [A] to both sides
of washers and the threads of bolts and nut.
M10 Cylinder Head Bolts [B]
M10 Cylinder Nut [C]
M8 Cylinder Bolt [D]
Torque the all the bolts and nut following the tightening
sequence [1 ∼ 8].
Torque - Cylinder Head Bolts (M10):
First: 25 N·m (2.5 kgf·m, 18 ft·lb)
Used Bolts 49 N·m (5.0 kgf·m, 36 ft·lb)
New Bolts 54 N·m (5.5 kgf·m, 40 ft·lb)
Cylinder Nut (M10): 49 N·m (5.0 kgf·m, 36 ft·lb)
Cylinder Bolt (M8): 27.5 N·m (2.8 kgf·m, 20 ft·lb)
The tightening sequence No.1
head bolts that are tightened between the cylinder head
with the crankcase.
The No.6 is the cylinder head bolt that is tightened be-
tween the cylinder head with the cylinder.
The No.7 and No.8 are the cylinder nut and cylinder
bolt that are tightened between the cylinder and the
No.5 are the cylinder
ENGINE TOP END 5-23