Infinity HTS-20 Owner's Manual page 10

H M
ORIZONTAL OUNTING
Figure 6. This illustration shows how to
mount the speaker horizontally on a
wall or ceiling four different ways.
10 HTS-20 Home-Theater System – Owner' s Manual
...
For horizontal mounting, fasten the #6 wood screws (not included) to a wall stud, leaving a 3⁄16"
clearance between the base of the screw head and the wall. If desired, loosen the bracket screw,
adjust the bracket angle, and tighten the bracket screw.
NOTE: You may want to route the wires before tightening the bracket screw (see Figure 8 on page 11).
Then orient the speaker horizontally, align the crossholes on the rear of the speaker with the
screws, and slide the speaker down. Rotate the logo to match the orientation of the speaker.
(rear view)
(inside hole)
Positions
(side view)
20 Tilt Up
(Bracket Closed)
HORIZONTAL MOUNTING USING BRACKET
Loosen Screw
Screw
Rotate Bracket
Tighten Screw
Slide Speaker Down
Onto Wood Screws
45 Tilt Up
(Bracket Open, (Bracket Open,
Position #1)
3/16"
wood
screw
(side view)
#6 Wood Screws
(fasten to wall stud)
67.5 Tilt Up 90 Tilt Up
(Bracket Open,
Position #2) Position #3)
wall