1. Squeeze the clutch lever toward the handlebar and
release it. It should move freely and smoothly, and it
should return to the rest position quickly when
released. If the lever fails to perform as stated, service
the clutch lever before riding.
2. Freeplay (gap) is the amount of lever movement from
the rest position to the point of cable resistance. Clutch
lever freeplay should be 0.5-1.5 mm. Measure the gap
between the clutch lever and the lever housing. Adjust
clutch lever freeplay if necessary. See page 100.
Tip: The starter interlock switch is dependent on the clutch lever
freeplay being set correctly to ensure activation of the clutch