AEG MC 4434 DVD Instruction Manual page 35

1. Analog Audio Setup
1) Surround
(1) LT/RT: audio output from Left and Right channel
(2) Stereo: stereo audio output
2) Dual Mono
This option is used to set the mode of audio output, including Stereo, L-Mono, R-Mono and Mix-Mono.
3) Dolby Dynamic
This option is chosen when Line output is selected for the compressing mode. Linear compressing ratio is adjusted to
acquire different compressing effects.
4) Dialog: This option is used to adjust the dialog.
2. Digital Audio Setup
1) Digital Output
When playing the DOLBY, or MPEG discs, the optical or coaxial terminal will be output in SPDIF/RAW format. Meanwhile
the connected amplifier must be able to decode the DOLBY DIGITAL, or MPEG.
SPDIF/PCM may be selected when the player is connected with a 2CH digital stereo amplifier.
2) LPCM Output
LPCM (linear pulse code modulation) is a non-compressed audio digital technology. There are two output mode: 48KHz,
96KHz.
3. Equalizer
1) Equalizer Mode
This option is used to select the different balanced effect, such as OFF, ROCK, POP, LIVE, DANCE, TECHNO, CLASSIC, SOFT.
2) Bass Boost
It use to adjust the sound effect of Bass boost to ON or OFF.
3) Super Bass
ON: set the super bass on, and adjust the super bass effect. OFF: set the super bass off.
4) Treble Boost
ON: set the treble boost on and adjust the treble effect. OFF: set the super treble boost off.
4. HDCD
This option has three setting: OFF, 44.1KHz, 88.2KHz, please set it according to the disc so that getting more clear and more
exquisite sound.
4. General Setup Page
1. Angle Mark
If you select the angle mark, the multi-angle mark can be shown on the screen when the disc have the multi-angle pictures.
2. Close Caption
When playing DVD disc, choose this OFF option to close caption, choose ON option to open the caption. The effectiveness is
subject to the disc you are playing.
English
35