2.7.1
Boot Sequence
This parameter allows you to specify the boot search sequence during POST.
•
st
1
. The system checks this drive first.
•
nd
2
. The system then checks this drive if it can not boot from the
st
1
specified drive.
•
rd
st
3
. If the 1
BIOS will display an error message if the drive(s) specified is not bootable.
2.7.2
First Hard Disk Drive
This parameter specifies whether the BIOS utility will boot from an EIDE hard disk drive
or a SCSI hard disk drive. The system will automatically boot from an EIDE hard disk if
your system does not have a SCSI hard disk drive. The default setting is IDE.
2.7.3
Fast Boot
This parameter allows the system to boot faster by skipping some POST routines. The
default setting is Disabled
nd
and 2
searches fail then it boots from this drive.
.
Index
lxi