Control Panel; Operating The Samsung Side-By-Side Refrigerator - Samsung RS25H5121 Series User Manual

Operating the SAMSUNG side-
by-side refrigerator
CHECKING THE CONTROL
PANEL
(1)
(2)
(5)
( 1 ) Energy Saver (°C↔°F (3 sec))
For better energy efficiency, press the Energy
Saver button.
If condensation occurs on the doors, turn the
Energy Saver Button function off.
To switch the temperature units between ºC and
ºF. Touch and hold this button for 3 seconds to
select the temperature display you want.
Each time you press and hold the button, the ºC
and ºF temperature modes alternate and the ºC
or ºF icon lights up, indicating your selection.
( 2 ) Freezer (Power Freeze (3 sec))
Press the Freezer button to set the freezer
temperature between 5 °F (-15 °C) and -8 °F
(-23 °C)
Press and hold the Freezer button for 3 seconds
to activate Power Freezer function which speeds
up the freezing process in the freezer.
This can be helpful if you need to quickly freeze
items that spoil easily or if the temperature in the
freezer has warmed dramatically (For example, if
the door was left open).
This Function must be activated before putting
large stuff in freezer compartment at least
24 hours before.
SSEDA-14 (RS25H5121) .indd 18
(3)
(4)
(6)
English - 18
( 3 ) Lighting (Control Lock (3 sec))
Press the Lighting button to turn on the
dispenser LED lamp.
If you press and hold the Lighting button for
3 seconds, all buttons will be locked and the
dispenser pad will not work.
( 4 ) Fridge (Power Cool (3 sec))
Press the Fridge button to set the Fridge
temperature between 44 °F (7 °C) and 34 °F
(1 °C).
Press and hold the Fridge button for 3 seconds
to activate Power Cool function which speeds up
the cooling process in the refrigerator.
( 5 ) Ice (Ice Maker Off (3 sec))
Press the Ice button to get ice from the
dispenser. Press the Ice button to select cubed
or crushed ice.
Press and hold the Ice button for 3 seconds to
turn the ice making function off.
( 6 ) Water (Reset Filter (3 sec))
Press the Water button to get water from the
dispenser.
Press and hold the Water button for 3 seconds
after changing the lter to reset the filter schedule.
To deactivate the secondary functions
(such as Power Freeze, Ice Off, Power
Cool and Control Lock), press and hold
the corresponding button again for 3
seconds.
2013. 11. 28. 11:28