Installation - LG Refrigerator Owner's Manual

INSTALLATION

Installing on a firm and flat surface
- Unstable installation is the main reason
of vibration and noise.
- When the refrigerator is installed unstably,
it can be stabilized by adjusting the
adjustable foot.
- Slightly rising the front part of the
refrigerator allow you to close the door
very easily.
- When installed on a carpet or floor,please put
a firm mat under the refrigerator otherwise
the bottom part will change colour.
Slightly rise
the front part
Adjustable Foot
Installing in a less humid environment
- Do not install the refrigerator in a humid place
or where water can easily be splashed.
- If the refrigerator is installed in a humid
environment,it will go moldy.This will lower
insulation property and cause electricity leakage
mat
Humidity
Keep an appropriate distance between
the wall
- To ensure proper air circulation around the fridge-
freezer, please maintain sufficient space on both
the sides as well As top and maintain at least 2
inches (5 cm) from the rear wall.
- A smaller gap will restrict the operation of the
refrigerator,which may result in an increase in
power.
Keep distance
Avoid installing near heat and gas
- High temperature will lower the refrigeration
and increase the power consumption.
- Installing near gas or smoke will change the
surface colour of the refrigerator.
5
More than
5cm rear