Symbols On The Machine; Safety Precautions - Husqvarna 150BT Operator's Manual

Blower
Hide thumbs Also See for 150BT:
Table of Contents

Advertisement

Available languages

Available languages

(a)
For safe operation and maintenance, symbols are carved in relief on the machine. Using to these indications, please
be careful not to make a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: INTAKE CUP
(e) The emission information label
*1 : THE ACTUAL MANUFACTURING MONTH WILL BE
PRINTED.
A : Model
B : ENGINE
FAMILY
150BT
9HQZS.0505BP
*2 : THE INITIAL CODE WILL BE CHANGED EVERY
YEAR OF MANUFACTURING.
WARNING
1.
Read this Blower Operator Manual carefully. Be
sure you understand how to operate this unit
properly before you use it. Failure to do so
could result in serious injury.
2.
Be sure to keep this manual
handy so that you may refer to
it later whenever any questions
arise. Also note that you are
requested to contact the dealer
from whom you purchased the
product for assistance the
event that you have any questions which
cannot be answered herein.
3.
Always be sure to include this manual when
selling, lending, or otherwise transferring the
ownership of this product.
4.
Do not lend or rent your machine without the
owner's manul.
5.
Be sure that anyone using your unit understands
the information contained in this manual.
6.
Never let a child use the machine.
7.
Long-term exposure to noise can result in
permanent hearing impairment. So always
use approved hearing protection.
115 24 05-49 Rev. 5 2013-01-22

Symbols on the machine

(b)
<FOR EPA & CARB>
C : ENGINE
DISPLACEMENT
* 2
50cc

Safety Precautions

(c)
(c) The direction to open the choke
Position: INTAKE CUP
(d) The direction to stop the engine
Position: THROTTLE LEVER
This engine label certifies that the product is certified in
accordance with American exhaust emissions
requirements EPA Ph III and CARB Tier III. The
Emissions Compliance Period referred to on the
emissions Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal and California emission requirements.
For customer assistance call: 1-800-487-5951 or
contact us at our website: www.husqvarna.com
8.
Under no circumstances may the design of
the machine be modified without the
permission of the manufacturer. Always use
genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
9.
A blower is a dangerous tool if used
carelessly or incorrectly and can cause
serious, even fatal injuries. It is extremely
important that you read and understand the
contents of this Operator's manual.
10. Husqvarna AB has a policy of continuous
product development and therefore reserves
the right to modify the design and appearance
of products without prior notice.
11. The machine is only designed for blowing
lawns, pathways, asphalt roads and the like.
English
(d)
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents