Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu Siemens Computers SCALEOVIEW Q22W-1
Summary of Contents for Fujitsu Siemens Computers SCALEOVIEW Q22W-1
- Page 1 Monitor English Operating Manual SCALEOVIEW H22-1W/Q22W-1...
- Page 2 Are there… ... any technical problems or other questions which you would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com...
- Page 4 This manual was produced by Xerox Global Services Published by Fujitsu Siemens Computers GmbH AG 03/07 Edition 1 Order no.: A26361-K1213-Z120-1-7619...
- Page 5 SCALEOVIEW H22-1W/Q22W-1 Operating Manual March 2007 edition...
- Page 6 VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH 2007 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages.
-
Page 7: Table Of Contents
Contents Introduction............................1 Important notes............................. 2 Safety notes..........................2 Power cable..........................3 Transport ............................4 Cleaning ............................4 CE marking........................... 4 FCC Class B Compliance Statement ................... 5 Declaration of Conformity ......................6 Energy Star Guidelines......................... 6 Disposal and recycling ......................... 7 Checking the contents of the consignment................... - Page 8 Contents A26361-K1213-Z120-1-7619...
-
Page 9: Introduction
Introduction Your new LCD (Liquid Crystal Display) monitor SCALEOVIEW H22-1W/Q22W-1 offers numerous features and functions, for example: ● TFT display (Thin Film Transistor; active matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) ●... -
Page 10: Important Notes
SCALEOVIEW H22-1W/Q22W-1 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. Supplementary information, remarks, and tips follow this symbol. -
Page 11: Power Cable
SCALEOVIEW H22-1W/Q22W-1 ● The monitor is equipped with a power cable that complies with safety standards. ● Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the "Connecting the monitor" chapter. ●... -
Page 12: Transport
SCALEOVIEW H22-1W/Q22W-1 Transport ● Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts. ● Never drop the LCD monitor (danger of glass breakage). Cleaning ● Always pull out the power plug before you clean the monitor. ●... -
Page 13: Fcc Class B Compliance Statement
● Consult the dealer or an experienced radio/TV technician for help. Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused by unauthorised modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The correction of interferences caused by such unauthorised modification, substitution or attachment will be the responsibility of the user. -
Page 14: Declaration Of Conformity
Fax No.: (408) 746-8299 We, Fujitsu Siemens Computers Inc., hereby declare that the equipment bearing the trade name and model number specified above was tested confirming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements. -
Page 15: Disposal And Recycling
Any components not reclaimed will be disposed of in an environmentally acceptable manner. If you have any questions on disposal, please contact your local office, our help desk, or: Germany Belgium Switzerland Fujitsu Siemens Computers RECUPEL SWICO GmbH Boulevard Reyers, 80... - Page 16 SCALEOVIEW H22-1W/Q22W-1 – one Warranty Booklet – one "Quick Start Guide" flyer – one “Safety” manual Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately. We recommend that you keep the original packaging material. You may need the packaging in the future if you need to transport your device.
-
Page 17: Installing An Ergonomic Video Workstation
SCALEOVIEW H22-1W/Q22W-1 Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. Avoid glare from electric Windows Approx. 90° and more lighting. -
Page 18: Mounting And Removing The Monitor Base
SCALEOVIEW H22-1W/Q22W-1 Mounting and removing the monitor base Mounting monitor base When delivered the lower section of the monitor base is removed. ► Push the lower section of the monitor base (2) in the upper section (1). ► Fasten the screw (3). A26361-K1213-Z120-1-7619, edition 1... -
Page 19: Removing Monitor Base
SCALEOVIEW H22-1W/Q22W-1 Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the entire monitor base. ► Switch off the monitor and pull the power plug out of the power socket. The display surface is susceptible to scratching! ►... -
Page 20: Connecting The Monitor
SCALEOVIEW H22-1W/Q22W-1 Connecting the monitor Please take note of the safety information in the "Important notes" chapter. CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. Do not cover the ventilation openings of the monitor. The computer power plug must be pulled out! ►... - Page 21 SCALEOVIEW H22-1W/Q22W-1 The data cables supplied have one 15-pin D-SUB connector (4) or one 24-pin DVI-D connector (2) and one 19-pin HDMI connector (3) for connection to the monitor and to the computer. ► Select the suitable data cable for your computer. Digital graphics card with DVI /HDMI interface: DVI-D or HDMI connector Graphics card with VGA interface:...
-
Page 22: Connecting Cables To The Computer
SCALEOVIEW H22-1W/Q22W-1 Video (AV/CVBS): Connection for AV video input signals Yellow (6) e.g. for DVD player, video recorder, film camera with video port or gaming console AUDIO (7) e.g. for DVD player, video recorder, film camera with video port, gaming console, HDTV decoder or HDTV video recorder red (right) white (left) PC AUDIO IN (8) - Page 23 SCALEOVIEW H22-1W/Q22W-1 ► Plug the connector of the mains cable provided into the monitor outlet of the computer or into a properly earthed outlet and ensure a safe connection. ► Plug the power connector of the computer into a properly grounded mains outlet. When you start working with your monitor for the first time you should install the appropriate graphics drivers for your application software.
-
Page 24: Operation Of The Monitor
SCALEOVIEW H22-1W/Q22W-1 Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting rake The rake of the monitor can be adjusted by -5° (forward) and +20° (back) from its vertical position. ►... -
Page 25: Notes On Power Management
SCALEOVIEW H22-1W/Q22W-1 Notes on power management If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect. -
Page 26: Changing The Monitor Settings
SCALEOVIEW H22-1W/Q22W-1 Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor settings with the CD supplied If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be set with the CD supplied. -
Page 27: Monitor Settings Using The Osd Menu
SCALEOVIEW H22-1W/Q22W-1 The following settings are offered: Optimal recommended color enhance mode setting by input Office suitable and optimised for word processing Photo suitable and optimised for photo editing Video suitable and optimised for videos Games suitable and optimised for games Activating/deactivating muting ►... - Page 28 SCALEOVIEW H22-1W/Q22W-1 PC Mode Video Mode The first function ( H-Position ) is highlighted. ► If necessary, press the /INPUT button to mark another function. ► Press the SELECT/MENU button to select the highlighted function. ► Press the /INPUT button to adjust the value for the selected function.
- Page 29 SCALEOVIEW H22-1W/Q22W-1 Adjusting the brightness and contrast Calling the Brightness / Contrast setting window Setting the brightness of the display Brightness With this function you change the brightness of the background lighting. Setting the contrast of the display Contrast With this function you modify the contrast of bright colour tones. Desk Light Adjust the brightness of the desk light This function is used to change the brightness of the desk light.
- Page 30 SCALEOVIEW H22-1W/Q22W-1 Adjusting the volume Calling the Audio setting window Setting the volume for playback with the integrated loudspeakers Volume Switching the loudspeakers off or on Mute Source Selecting audio source for audio inputs (PC or video devices) Setting colour temperature and colours Calling the Colour setting window.
- Page 31 SCALEOVIEW H22-1W/Q22W-1 Setting functions in the "Advanced" menu Calling the Advanced setting window Selecting input signal Input Select With this function you switch the monitor from the analogue to the digital mode or to video mode and vice versa, when more signal sources are connected The condition is that the graphic card used supports this function.
-
Page 32: Operating Of The Camera
SCALEOVIEW H22-1W/Q22W-1 Operating of the camera Optional application with the Q22W-1 monitor. The integrated camera/video and audio channels can be connected to a PC system using the standard USB port integrated in the device. In order to ensure that the camera operates correctly with full functionality, the appropriate software must be installed. -
Page 33: Troubleshooting
SCALEOVIEW H22-1W/Q22W-1 Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen display... - Page 34 SCALEOVIEW H22-1W/Q22W-1 Having this problem? Check the following points: Picture position not correct The monitor recognises an undefined mode (see the "Technical data" chapter). ► Press the EXIT/AUTO button to perform the auto- adjustment of the screen. ► Set the picture position with the OSD menu (see the "Operation of the monitor"...
-
Page 35: Notes Regarding The Din En Iso 13406-2 Standard
SCALEOVIEW H22-1W/Q22W-1 Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II). -
Page 36: Technical Data
SCALEOVIEW H22-1W/Q22W-1 Technical data Dimensions and weight (LCD monitor) Visible diagonals: 56 cm Dot pitch: 0.28 mm (H) x 0.28 mm (V) Screen size: 473.76 mm x 296.1 mm Maximal resolution: 1680 x 1050 Dimensions (W x H x D) incl. 513.72 mm x 444.79 mm x 219.82 mm monitor base: Dimensions box (W x H x D):... -
Page 37: Vesa-Ddc / Ci 1,1-Compatible Vga Interface
If the monitor SCALEOVIEW H22-1W/Q22W-1 is not yet displayed in the list of monitors, you can select the following monitor instead: Fujitsu Siemens: SCENICVIEW P19-1, SCENICVIEW P19-2 (Resolution: 1280 x 1024) Preset operating modes The picture position and size have been set to optimum values at the factory for the operating modes listed above. -
Page 38: Power Supply Plug
SCALEOVIEW H22-1W/Q22W-1 Video mode Resolution V-Freq H-Freq Pixel Rate Remark [Hz] [kHz] [MHz] 640 x 480p 31.469 25.175 NSTC 720 x 480i 15.734 27.000 All inputs HDTV: Component, 720 x 480p 31.469 27.000 DVI, HDMI 720 x 576i 31.250 27.000 All inputs HDTV: Component, 720 x 576p... -
Page 39: Monitor Port Dvi-D/Dvi-I
SCALEOVIEW H22-1W/Q22W-1 Monitor port DVI-D/DVI-I C1 C2 Meaning Meaning Meaning TMDS Data2- TMDS Data 1/3 Shield not connected TMDS Data2+ not connected TMDS Clock Shield TMDS Data 2/4 Shield not connected TMDS Clock+ not connected +5V Power TMDS Clock- not connected Earth DDC Clock Hot Plug Detect... -
Page 40: Pin Assignment D-Sub
SCALEOVIEW H22-1W/Q22W-1 Pin assignment D-SUB Meaning Meaning Video input red +5 V (DDC) Video input green Sync. earth Video input blue Earth Earth DDC-Data Earth H. sync Red video earth V. sync Green video earth DDC Clock Blue video earth Pin assignment HDMI Meaning Meaning... -
Page 41: S-Video Port
SCALEOVIEW H22-1W/Q22W-1 S-Video port Meaning Luminance (Y) Chrominance (C) A26361-K1213-Z120-1-7619, edition 1...