Table of Contents
Advertisement
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the Forwards / ECO button to switch the ECO operating mode on or off.
The message ECO on / off is displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
temperature
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and keep the
switch on the monitor with the ON/OFF switch.
The message OSD locked / unlocked is displayed.
Proceed in the same way to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the Forwards / ECO button and the Back /
time and keep them pressed for a few seconds.
The message Power button locked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
A26361-K1319-Z220-1-7619, edition 2
6500K
reduced
button pressed for a few seconds while you
SELECT/MENU
INPUT
button at the same
Operation
19
Advertisement
Table of Contents
