Maintenance; General; Maintenance Schedule - Husqvarna K760 Operator's Manual

General

WARNING! The user must only carry out
!
the maintenance and service work
described in this manual. More extensive
work must be carried out by an
authorized service workshop.
The engine should be switched off, and
the stop switch in STOP position.
Wear personal protective equipment. See
under heading "Personal protective
equipment".
The life span of the machine can be
reduced and the risk of accidents can
increase if machine maintenance is not
carried out correctly and if service and/or
repairs are not carried out professionally.
If you need further information please
contact your nearest servicing dealer.
• Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
Daily maintenance
Cleaning
External cleaning
Cooling air intake
Functional inspection
General inspection
Throttle lockout*
Stop switch*
Blade guard*
Cutting blade**
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Cutting blades" and "Assembly and settings".
22 – English

MAINTENANCE

Weekly maintenance
Cleaning
Functional inspection
Vibration damping system*
Muffler*
Drive belt
Carburetor
Starter
Monthly maintenance
Cleaning
Spark plug
Fuel tank
Functional inspection
Fuel system
Air filter
Drive gear, clutch