Using fast forward or reverse
Enlarging a screen section
Changing the viewing angle
Adjusting the volume
Creating a playlist (DVD/CD/MP3)
05-DVD 4543_AEG_GB.indd 50
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the (Fig. 3/22) or button (Fig. 3/23) to start fast forward
or fast reverse. The current replay direction and the speed, e.g.
"FORWARD x 2 " is now displayed on screen.
2. Press the or button several times in order to change the speed.
The speed can be accelerated by factor 2, 4, 8 or 20.
3. Press the "II" button (Fig. 3/24) to restart the "normal" replay when
the desired section is reached.
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM button (Fig. 3/6) to change the screen section. Press the
button several times to select the suitable zoom factor or to return to
the original zoom factor.
With the cursor buttons (Fig. 3/27) you can move through the zoomed
Some DVDs offer the possibility to select the viewing angle.
Press the ANGLE button (Fig. 3/32) to change the viewing angle.
If changing the Viewing Angle is not possible, the message "INVALID
KEY" will be displayed.
Repeat pressing the the button to choose a different viewing angle, or
to return to the original viewing angle.
Press the VOL + button (Fig. 3/14) to increase the volume.
Press the VOL - button (Fig. 3/16) to reduce the volume.
Please remember, that this will only change the output volume of the
DVD-Player. In order to adjust the volume to your requirements you
may also have to change the volume of the playback device.
It is possible that you may not wish to play the titles in the same order
that they are to be found on the DVD. The function "Create Playlist" you
can create your own playing order.
To do this, proceed as follows:
1. Press the PROG button (Fig. 3/30). A table is displayed. Here you can
enter the desired order of tracks (in the case of CDs/MP3 CDs) or
chapters/titles (in the case of DVDs).
However, your playlist will be lost when switching off the DVD-
Players or when inserting a new DVD.
2. Use the Cursor Buttons (Fig. 3/27) to navigate in the table.
3. Enter the desired title and chapter at the relevant position in the
table. Use the Numerical Buttons (Fig. 3/2) for this purpose.
25.09.2009 9:00:48 Uhr