Samsung UN26EH4000 Quick Start Manual page 5

5. Configuring the Basic Settings with Plug & Play
When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring basic
settings. Before you begin, make sure you have connected the TV to an antenna or a cable connection and that the TV
is plugged in. See "Connections" for instructions. To begin Plug and Play, press the
✎
Plug & Play is available only when the Input source is set to TV. See "Changing the Input Source".
Plug & Play
Select Language of the OSD.
Language
Plug & Play
Select 'Home Use' when installing this TV in your home.
Store Demo
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Move
✎
If you have connected a cable or
satellite box to an HDMI, Component,
Composite, or Antenna input, and you
will use the box to select channels, press
the Menu ( ) button on your remote to
skip this step.
Auto Program
Select the cable system.
Analog STD HRC
STD HRC
Digital
START
Move
1. Start Screen
After you press the
ENTER
English
On the Language screen, press the
Español
/ buttons to select a language, and then press
Français
Move Enter
2. Select the Home Use Mode
On the Home Use screen, press
mode.
✎
Store Demo mode is for retail environments only.
Home Use
Move Enter
3. Select the Antenna Source
On the Antenna Source screen, select the source of your TV signal.
Air
Start If your TV is connected to an antenna Choose Air, and then press
ENTER
Start
is done, go to "Set the Clock Mode".
Start
Cable
If your TV is connected to a cable outlet, choose Cable, and then press
ENTER
Enter Skip
Auto
If you choose Auto, and then press
select the correct Antenna source. Go to "Select the Cable Type"
4. Select the Cable Type
On the Cable Type screen, use the
of digital and analog cable systems you have: STD, HRC, or IRC. Most
systems are STD (Standard). When done, select Start, and then press
ENTER
IRC
✎
Channel memorization can take up to 45 minutes, depending on
IRC
your cable system.
✎
Memorized channels are added to the Added Channel list. These are
the channels you will see when you use the Channel buttons on your
remote.
Enter Return
POWER
Select a Language
POWER button, the Start Screen appears. Press the
button on your remote to continue.
ENTER
ENTER
. The TV will automatically start memorizing channels. When it
. Go to "Select the Cable Type".
ENTER
. The TV will start memorizing channels.
- 5 -
button on your remote.
button. Use the
ENTER again.
to select the Home Use
, the TV will automatically
buttons to select the type