Parts List - Curtis WB-14-12 Service Manual

Setup Steps Continued
3. Connect the water line to the water inlet fitting on the rear of the unit. Water volume going to the machine should be consistent.
Use tubing sized sufficiently to provide a minimum flow rate of two gallons per minute.
4. Connect the unit to electrical outlet with appropriate amperage rating (refer to schematic for power requirements).
5. Turn on the circuit running power to unit. The water inlet valve will open, filling the unit. When the boiler has filled, turn on
boiler at the thermostat, twisting the knob clockwise.
6. Heating tank will require 50 to 60 minutes to attain operating temperature. Thermostat indicator will light at this time.

Parts List

2
ITEM PART № DESCRIPTION
1 WC-5602 LID, 6 GAL WITH KNOB
2 WC-6118-01 COLLAR, TOP
3 WC-4303 O-RING, LINERS RU
4 WC-5335 TUBING, 8" WATER INLET
5 WC-5502-01 PROBE, WATER LEVEL
6 WC-5510 COVER, PROBE WA WB14
7 WC-2401 ELBOW, 3/8 NPT X 1/4 FLARE PLATED
8 WC-3528 LEG, 4" ADJUSTABLE 3/8-16 THREAD ITALIAN STYLE
9 WC-5334 TUBING, 15-1/2" WATER INLET
10 WC- 501 KIT, THERMOSTAT WB-14
11 WC- 608-101 CONTROL BOARD, LIQUID LEVEL 120/240VAC
12 WC-2100 GAUGE GLASS ASSY, 7"
13 WC-2005 WASHER, 1/8" SHIELD CAP
14 WC-2024 GLASS, GAUGE 7"
15 WC-2006 WASHER, 3/16" SHIELD BASE
16 WC-3705 REPAIR KIT, S FAUCET
17 WC-1800HW FAUCET, S' SERIES H/W
18 WC-3217 KNOB, ELECTRIC THERMOSTAT
19 WC- 801 VALVE, INLET BRASS ½.50 GPM 120V 10W FOR WB-14-12
19A WC- 858 VALVE, INLET BRASS .50 GPM 220V 10W FOR WB-14-60
20 WC-3700 REPAIR KIT, INLET VALVE
21 WC- 922-04 KIT, HEATING ELEMENT 3.5KW 220V W/JAM NUTS & SLCN WSHRS
22 WC- 511 THERMOMETER, DIAL RU'S