How To Reverse Swing Door Handle - Kenmore 795.7620 Service Manual

Bottom freezer refrigerator
Hide thumbs Also See for 795.7620:
Table of Contents

Advertisement

3-8-4 HOW TO REVERSE SWING
DOOR HANDLE
NOTE: T o assist in installing the handle on the right
side, place a small piece of masking tape near the
top of the handle before removing.
Grasp the handle tightly with both hands and slide the
handle up (this may require some force).
The keyhole slots on the back of the handle allow
the handle to separate from the mounting screws.
Fig. 101
tape
Key hole
slots on
back
of handle
Use an adjustable wrench to remove the 2 handle
mounting screws.
Screws
mounted
on door
Fig. 102
To avoid scratching the door. Do not remove the
plug buttons by prying with a screwdriver.
Unscrew the buttons with your fingers by rotating
counterclockwise; they will loosen and fall free.
Fig. 103
Plug button
Screws
• Install the handle mounting screws on the
mounted
right side.
on door
Align the keyhole slots on the door handle to the
handle mounting screws on the door and
grasping the handle with both hands, press it
firmly against the front of the door and slide the
handle down. This may require some force.
- 23 -
Install the plug buttons on the left side.
Plug buttons
Fig. 104
Handle Mounting
Fig. 105
screws
Fig. 106
Keyhole slots
on back of
handle
Screws
mounted
on door

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

795.6827795.7827

Table of Contents