Xm Radio Menu Options; Xm Radio Reception - Victory Cross Roads Owner's Manual

XM Radio
Getting Started
The ignition key must be in the ACC or ON
position to use the audio system.
Tip: To prevent battery drain, do not leave the
key in the ACC position for long periods.
VICTORY recommends using the audio sys-
tem only when the engine is running.
Press VOL (+) to turn the audio system on.
Press and release the MODE button until the
XM radio is the active source.
XM
ICOM
CB19
When the XM radio is active, the console
screen will display radio channel, preset
number (if applicable), channel name or cat-
egory, artist, and song title.
CH55 P2 CAT
XM
ICOM
CB19

XM Radio Reception

If the XM radio system is not receiving a
signal due to being indoors (or any overhead
obstruction), "No Signl" appears on the dis-
play.
XM CH55
ICOM
CB19
Tip: If the antenna is disconnected, "Antenna"
will display.
120
ROCK
Artist
Song Title
No Signl

XM Radio Menu Options

The XM radio system has unique menus
that apply only to this system when the XM
radio is the active source. Some settings
such as bass, treble, fader, etc. apply to both
the audio system and the XM radio system.
Menus specific to the XM radio system are:
XM Display (Category or Channel Name)
XM Category (Rock, Country, Traffic,
Sports, All Channels, Talk News, etc.)
XM Tune Mode (Seek/Scan)
Tip: XM Tune Mode is unique to the XM radio
system.
XM Radio Settings
To access the menus, turn the audio system
power on and change the active source to
XM Radio.
Press the MODE button repeatedly to toggle
to the XM DISPLAY menu.
Press TUNE (+) or TUNE (-) to select CAT-
EGORY or CHANNEL NAME.
+
TUNE
CHANNEL NAME
-
+
TUNE
CATEGORY
-
In the CATEGORY mode, the category of a
selected station will display in the upper
right corner of the screen.
CH55 P2 CAT
XM
ICOM
CB19
In the CHANNEL NAME mode, the name
of the selected channel will display.
CH55
XM
ICOM
CB19
XM DISPLAY
XM DISPLAY
ROCK
Artist
Song Title
CH Name
Artist
Song Title