Advertisement
Advertisement
Table of Contents
Related Manuals for Hoover hygiene +
Summary of Contents for Hoover hygiene +
-
Page 1: Instruction Manual
Instruction Manual Please read this Manual before operating cleaner... -
Page 2: Before You Begin
Congratulations on your purchase of your new vacuum cleaner. There are many useful features built into your cleaner and we recommend that you carefully read this instruction book so that you may take best advantage of them. BEFORE YOU BEGIN This product must be operated in accordance with these instructions and used only for domestic cleaning to remove DRY dirt and dust from household carpets, fl... -
Page 3: After Use
FAULTS Do not continue to use this appliance if it appears to be faulty or the supply cord is damaged. If a fault cannot be rectifi ed, please return to the point of purchase. If damaged, return the cleaner for repair by an authorised Service Centre in order to avoid a safety hazard. - Page 4 Powerhead Socket Delux chrome telescopic wand Power plug Dust-full indicator On/Off Cord rewind Switch Powerhead Electronic power control When connecting the Powerhead to the Powerhead socket, make sure the leaner is turned off and disconnected from the mains supply. MIN (-) For delicate fabrics, like curtains. Max (+) For hard fl...
-
Page 5: Assembling Your Cleaner
ASSEMBLING YOUR CLEANER The cleaner should be switched off and disconnected from the mains supply before you start to assemble. 1. Connect the wand to the handle. 2. Adjust the telescopic wand. 3. Push the wand into the Powerhead by 4. -
Page 6: Operating Your Cleaner
ACCESSORIES Additional Accessories Your Hoover vacuum cleaner has been designed to handle a number of cleaning chores, effortlessly and effi ciently. Accessories, including a crevice tool, upholstery brush and dustong brush are conveniently located under the accessory cover. 1. Upholstery Brush 2. -
Page 7: Changing The Dust Bag
CHANGING THE DUST BAG The cleaner should be switched off and disconnected from the mains supply before you start to assemble. 1. Disconnect cleaner from power and remove hose from inlet duct. 2. To gain access to the dust-bag, lift the catch located under the inlet hole and raise the top cover.