Kenmore TSTAT0713K Owner's Manual page 25

1 for all programmable temperature & humidity
Hide thumbs Also See for TSTAT0713K:
Table of Contents

Advertisement

About Advanced Features & Operation
HUMIDIFICATION/DEHUMIDIFICATION SETPOINTS - When
adjusting the humidification and dehumidification setpoints,
the thermostat will not
get closer to the h
example: If the humidification setpoint was set to 35%, then
the dehumidification setpoint would not be able to be set
any lower than 40%. Additionally, if the dehumidification
setpoint was set to 25%, then the humidification setpoint
would not be able to be set any higher than 20%.
NOTE: The HUM terminal will be energized any time that
there is a call for Humidity. For the operation of the
DEHUM terminal see pages 8 and 18-20.
KEYPAD LOCK - To prevent unauthorized use of the thermostat,
the front panel buttons may be disabled. To disable, or 'lock' the
keypad, press and hold the MODE button. While holding the
MODE button, press the UP and DOWN buttons together. The
icon will appear on the display.
Press all three
buttons in the order
outlined above for
keypad lockout
MODE
To unlock the keypad, press and hold the MODE button.
While holding the MODE button, press the UP and DOWN
buttons together. The
MEMORY BACKUP - In the event of a power loss, the TSTAT-
0713K will retain the stored program settings without external
power or batteries.
allow the dehumidification s
umidification s
etpoint than 5%. For
:
I2 00
70
Am
M
icon will disappear from the display.
Page 24
etpoint to
82
o
ProgramOn
Night
COOL
62
HEAT
o

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents