Related Manuals for DiBoss LT-40H6LVH
Summary of Contents for DiBoss LT-40H6LVH
- Page 1 Wide LCD-TV Instruction Manual LT-40H6LVH ● LT-40T6LVH ● LT-46T6LVH ● Please read this manual carefully before operating your set.
-
Page 2: Uwarnings 2~4
Warnings Warnings The lightning flash with arrowhead symbol, within an equilateral triangle, WARNING is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated DO NOT OPEN “dangerous voltage” within the product’s enclosure that may be of WARNING : sufficient magnitude to constitute a risk of electric shock to persons. -
Page 3: Trademark Information
Warnings Warnings Cleaning Unplug the TV before cleaning the face of the LCD Screen. Dust the TV by wiping the screen and cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid or aerosol cleaners. POWER The main plug should be inserted fully into the power outlet to avoid a fire hazard. - Page 4 Use the following appliance(s) only with the following wall mounting bracket. Use with other Wall mounting bracket may cause instability and result in possible injury. APPLIANCE MODEL NO: LT-40T6LVH LT-40H6LVH LT-46T6LVH TV WALL MOUNTING BRACKET MODEL NO: KT-90(Use for 40inch.) KT-100(Use for 46inch.)
-
Page 5: Table Of Contents
Contents Contents uBefore operating the set, please read this manual carefully. uWarnings uContents uSupplied Accessories uInstallation uConnecting Speaker uControls 10~13 Front Panel Rear Panel Remote controller 12~13 uBasic Operation 14~15 Turning the TV On and Off Programme selection Volume adjustment Ï... -
Page 6: Ubefore Operating The Set, Please Read This Manual Carefully
Contents Contents uBefore operating the set, please read this manual carefully. uTELETEXT 30~31 Text On/Off TOP text FLOF text Special TELETEXT functions uExternal Equipment Connection 32~33 Antenna Connection SCART 2(AV 2) IN SCART 1(AV 1) IN COMPONENT IN Connecting to HDMI(High Definition Multimedia Interface) S-VIDEO IN Headphone jack Coaxial OUT... -
Page 7: Usupplied Accessories
Supplied Accessories uMake sure the following accessories are provided with Product. AC cord Batteries (2EA) Remote controller Wide LCD-TV Instruction Manual ● LT-40H6LVH ● LT-40T6LVH ● LT-46T6LVH Please read this manual carefully before operating your set. VGA cable Instruction manual... -
Page 8: Uinstallation
Installation Installation Installation Options uYou can install the TV on a wall or place it on a table-like surface. uTo eliminate any risk of injury from the TV falling, it should be mounted securely. Wall Installation Do not install the TV on a weak wall surface, like plaster etc. Caution When the TV is placed into a cupboard, the distance between the TV and the wall... -
Page 9: Uconnecting Speaker
Connecting Speaker Connecting Speaker L Connecting TV and Speaker(LT-40T6LVH, LT-46T6LVH) Fix the bracket onto the guide pole located on the rear of TV and Speaker. speaker joint bracket Clamp the speaker and the TV together fasten the screws. Connecting the speaker audio cable to the external speaker output jack on the TV. External speaker output jack Fix the speaker audio cable on the quick clamp... -
Page 10: Ucontrols 10~13
Controls Controls Front Panel [LT-40H6LVH] [LT-40T6LVH, LT-46T6LVH] 1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. ▼PR ▲ (Programme Up/Down) Selects a programme or a menu item. 4. ◀VOL ▶ (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. -
Page 11: Rear Panel
Controls Controls Rear Panel 1. PC ANALOG IN (D-SUB) 2. HDMI (High Definition Multimedia Interface) IN Connect to the HDMI jack for device with HDMI output. 3. PC AUDIO IN Connect the audio cable from the PC to the PC AUDIO IN of the set. 4. -
Page 12: Remote Controller
Controls Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. - Page 13 Controls Controls 13. VOLÏ/VOLq(Volume Up/Down) Adjuste the sound level. 14. ARC( Selects a screen mode- 16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom and Auto. 15. TELETEXT Buttons These buttons are used for TELETEXT. For further details, see the ‘TELETEXT’ section. 16.
-
Page 14: Ubasic Operation 14~15
Basic Operation Basic Operation Turning the TV On and Off Standby Setup: The AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the front panel of the TV to go into standby mode. -
Page 15: On Screen Menu Language Selection
Basic Operation Basic Operation On screen menu language selection The menu can be displayed on the screen in desired language. First select your language. Setup Language Press the MENU button. Select the Setup menu with PRx x /PRy y button. Press the Ï... -
Page 16: Uon Screen Menus And Display
On Screen On Screen Menus and Display Menus and Display Press the MENU button to display main menu. Press the PRx x /PRy y button to select menus-Picture, Sound, Special, Setup. Adjust each menu with the Ï Ï q q button. Press the MENU button to return to preceding menu. -
Page 17: Usetting Up Tv Programme 17~19
Setting up TV Programme Setting up TV Programme Once you have preset the programme, you will be able to use the PRx x /PRy y or NUMBER buttons to scan the programme you programmed. Programme can be tuned using Auto or Manual programme menu. Auto Programme All programme that can be received are stored by this method. -
Page 18: Manual Programme
Setting up TV Programme Setting up TV Programme Manual Programme Manual Programme lets you manually tune and arrange the programme in whatever order you desire. Also you can assign a programme name with 8 characters to each programme number. Press the MENU button. Select the Setup menu. -
Page 19: Programme Edit
Setting up TV Programme Setting up TV Programme Programme Edit This function enables you to delete, favourite, move or skip the stored programme. Also you can move some programme to other programme numbers or insert a blank programme data into the selected programme number. -
Page 20: Upicture Control 20~21
Picture Control Picture Control You can adjust Colour Temperature, Contrast, Brightness, Colour, Sharpness and Tint(Only in NTSC mode) to the levels you prefer. Manual Picture Control Press the MENU button. Select Picture using the PRx x /PRy y button, and press the Ï... -
Page 21: Picture Effect
Picture Control Picture Control PICTURE Effect Press the PICTURE( ) button. Press the PICTURE( ) button repeatedly to select Picture effect. Each press of the button changes the screen display as below. Dynamic Standard Mild Game User • Dynamic : Vivid Picture Appearance •... -
Page 22: Usound Control
Sound Control Sound Control You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programme. Manual Sound Control Press the MENU button. -
Page 23: Sound Effect
Sound Control Sound Control SOUND Effect Press the SOUND( ) button. Press the SOUND( ) button repeatedly to select. Each press of the button changes the screen display as below. Flat Music Movie Speech User SRS WOW Auto Sound Control * The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. -
Page 24: Uother Functions 24~29
Other functions Other functions Clock Setting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV On or Off time. Press the MENU button. Press the PRx x /PRy y button to select the Setup menu. Then press the Ï... -
Page 25: Noise Reduction)
Other functions Other functions N.R.(Noise Reduction) The N.R feature improves the picture quality by setting to Mode1 or Mode2. If you experience noise on a certain programme, set the N.R to Mode1 or Mode2 for this programme, to obtain the optimum picture. Press the MENU button, select the Special. -
Page 26: Childlock
Other functions Other functions Childlock Childlock menu is necessary in order to disable the buttons on the front/side panel of the set. Especially it is useful to prevent unauthorized viewing. Press the PRx x /PR button to select Childlock. Press the Ï Ï q q button repeatedly to select On or Off. * When the setting is Childlock On, the buttons except ON/OFF button on the front/side panel of the set is disabled. -
Page 27: I/Ii
Other functions Other functions I/II Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again. Language selection for dual language broadcast If a programme is received in two languages (dual language), you can switch to DUAL I, DUAL II, DUAL I+II by pressing the I/II button repeatedly. -
Page 28: Sleep Timer
Other functions Other functions Sleep timer You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses. Press the SLEEP button to select the number of minutes. The display will appear on the screen, followed by 0, 15, 30, 60, 120. -
Page 29: Calling The Programme List
Other functions Other functions Calling the programme list You can check the programmes stored in the memory by displaying the programme list. Displaying programme list Press the LIST button to display the Programme list menu. The programme list appears on the screen. One programme list page contains twenty programmes as right picture. -
Page 30: Uteletext 30~31
TELETEXT TELETEXT TEXT On/Off Press the TEXT button to switch to TELETEXT. The initial page or last selected page appears on the screen. The first page number indicates your selection, while the second shows the current page displayed. Press TEXT button once, displays the TELETEXT pages. Press MIX button once more, displays the TELETEXT pages superimposed on the TV picture. -
Page 31: Special Teletext Functions
TELETEXT TELETEXT Special TELETEXT functions MENU Functions TEXT Changes TELETEXT mode Selects double height text. Press this button to enlarge the top half of the page. SIZE Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. Stops the automatic page change, which will occur if a TELETEXT page consists of 2 or more sub pages. -
Page 32: Uexternal Equipment Connection 32~33
External External Equipment Connection Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. Antenna connection Connect RF out on the VCR to the Antenna input on the rear of the TV. SCART 2(AV 2) IN Connect the AV out jacks on the AV device to the SCART 2 on the TV. -
Page 33: Connecting To Hdmi(High Definition Multimedia Interface)
External External Equipment Connection Equipment Connection Connecting to HDMI (High Definition Multimedia Interface) Connect an HDMI cable between the “HDMI IN” jack on the TV and the HDMI OUT jack on the set-top box. Please check that the HDMI source is powered on. Press the TV/AV button to select HDMI mode. -
Page 34: Uconnecting The Pc As A Monitor 34~37
Connecting Connecting the PC as a monitor the PC as a monitor This function is possible only when the set is in PC mode. Use the TV/AV or TV/PC button on remote controller. Picture adjustment You can adjust picture Colour Temperature, Contrast, Brightness, Colour, Sharpness and ARC as you prefer. -
Page 35: Sound Adjustment
Connecting Connecting the PC as a monitor the PC as a monitor Sound adjustment Press the MENU button. Select the Sound menu. Press the PRx x /PRy y button to select the desired sound item; Equalizer, Balance, AVL, SRS WOW, Headphone or Input. Press the Ï... -
Page 36: Setup
Connecting Connecting the PC as a monitor the PC as a monitor Setup This function is to adjust picture to left/right and up/down as you prefer. Press the MENU button. Select the Setup menu. Press the PRx x /PRy y button to select the desired item. Press the Ï... -
Page 37: Pc Input
Connecting Connecting the PC as a monitor the PC as a monitor PC INPUT Connect the PC IN cable (D sub cable) from the monitor output socket of the PC to the PC ANALOG IN socket of the set. Connect the PC AUDIO IN cable from the PC to the PC AUDIO IN of the set. Press the TV/AV or TV/PC button to select PC-ANALOG mode. -
Page 38: Uproduct Specifications
Product Specifications Product Specifications Model LT-40T6LVH/LT-40H6LVH LT-46T6LVH Television system PAL-BG, I, DK/ SECAM-BG, DK, L Television programme VHF: 2~13 UHF: 21~69 Cable: S1~S41 LCD Panel 40" Wide TFT LCD 46" Wide TFT LCD Panel Resolution WXGA(1366 x 768) Power consumption... -
Page 39: Utroubleshooting
Troubleshooting Troubleshooting Problem Check item • Make sure the remote control is not in the standby No picture on screen and no sound mode (The POWER/Standby indicator is red.) from speakers. • Turn on the MAIN POWER button on the top of the display.
Need help?
Do you have a question about the LT-40H6LVH and is the answer not in the manual?
Questions and answers