Remote Control - Panasonic CS-PC9KKV Operating Instructions Manual

REMOTE CONTROL

Maximum distances: 8m
Press the remote control's button
1 TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2 TO SET TEMPERATURE
• For cool and dry modes, the range of temperature for
selection is 16˚C~30˚C.
• Operating the unit within the recommended temperature
could induce energy saving.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3 TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
• To change the standard setting temperature, press
" " or for "
Room Operation
temperature mode
23°C & Cool
above
Below 23°C Dry
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
FAN mode - To maintain a good ventilation of the room
• The compressor will not operate during air circulation
operation.
4
INDICATOR
(Green)
(Orange)
".
Standard setting
temperature
(+2°C)
25°C 27°C
22°C 24°C
4 TO SELECT FAN SPEED (3 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST VERTICAL AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY/FAN mode, if AUTO is set, the louver
swing up/down automatically.
3
for
4
(–2°C)
23°C
20°C
Remote Control display
2
1
5