Diagnosis; Disassembly - Pioneer CDX-M2096ZRN Service Manual

7.2 DIAGNOSIS

7.2.1 DISASSEMBLY

- Removing the Case (not shown)
1. Remove the eight screws and then remove the
upper case.
- Removing the Extension PCB
1. Remove the two connectors.
2.Stretch the claw indicated by arrow and then
remove the extension PCB.
Note : Before disassembling the CD mech module, turn the spring holder so that the spring is positioned
horizontally. After reassembling, return the spring to the vertical position.
EXTENSION PCB
CDX-M2096ZRN
41