Using the Travel Charger
Important! Verify that the handset battery is installed prior to
connection. If the battery is not properly installed
and the wall charger is connected, the handset
may power off and on continuously, preventing
1. Plug the flat end of the Travel Charger into the
charging/USB port and the other end into a standard
AC wall outlet.
2. When charging is finished, remove the flat end from
the interface connector port on the phone.
Warning! Please note that a touch screen responds best to a
light touch from the pad of your finger. Using
excessive force or a metallic object when pressing
on the touch screen may damage the tempered
glass surface and void the warranty. For more
information, refer to "Standard Limited Warranty" on
Note: Failure to unplug the wall charger before you remove the
battery, can cause damage to the phone.