Factory Diagnostic Mode; Troubleshooting - GE GLDT690T Technical Service Manual

Factory Diagnostic Mode

To enter the factory diagnostic mode:
• Turn the dishwasher off and make sure no LEDs are lit.
• Disconnect power to the dishwasher.
• Reapply power with the door open and quickly press and hold both the Select and ON/OFF pads within
60 seconds from connecting power.
• Close door.
If performed correctly, all LEDs and the SSD will fl ash every second until the next step is selected. Scroll
forward by pressing the Select button. To exit the factory diagnostic mode, either press the ON/OFF button
or disconnect power.
Step
1
2
3
4
5
6
7
8
9
10

Troubleshooting

Component
Fill Valve
Wash Pump
Dispenser
Wash Pump and Heater
Drain Pump
All Load Off
Fill Valve
Wash Pump
Drain
End
– 31 –
SSD
09
08
07
06
05
04
03
02
01
F0
Time or Temperature
38s
3m
60s
60m
60s
15s
38s
180s
60s
Software Version