Using Your Unit For The Very First Time - Silvercrest DC-5900 Owner's Manual

Before Operation - VCR part

Using your unit for the very first time

Notes
For the following steps we assume that you have just
connected your video recorder for the very first time.
To make tuning TV stations an easy task your VCR
incorporates the Automatic Channel Memory
System (ACMS). This system will automatically tune
and store TV channels to your VCR. While this is
happening the clock (date & time) in the video recorder
will be set automatically.
The ACMS system relies on signals transmitted by the TV
Station, for auto clock setting and station identification. If
the TV broadcast signal is weak or fluctuates your VCR
may not detect the necessary information and will be
unable to identify station names and sort them correctly.
To overcome this problem please turn to the MANUAL
TUNING section of this book on page 15.
Make sure that you have correctly installed your
1 1
VCR and tuned a video channel on your TV as
described earlier in this book.
Press POWER to turn on your VCR.
If you have a satellite receiver make sure that it is
connected to your VCR, switched on and Sky News
has been selected.
(Initial Menu Screen)
Pr-12
ACMS
If the initial Menu Screen doesn't appear on
screen, make sure that you have tuned your
TV to a video channel. Or if this is correct it
may mean that your VCR is already tuned.
Press OK to start the automatic tuning process.
2 2
01 C26
02 C33
03 C23
S
Pr-12
ACMS
12
D
ACMS
OK i
00 BBC1
00 BBC2
00 ITV
E
i
The TV station table will appear when tuning is
3 3
complete.
01 C26
02 C33
03 C23
04 C30
05 C37
06 - -
07 - -
08 - -
P SET
R
Press i to store your TV stations and remove the
TV station table.
00 BBC1
00 BBC2
00 ITV
00 CH4
00 CH5
- - - - - - -
- - - - - - -
- - - - - - -
MOVE :
DELETE : , OK i