Installation Procedure; Assembling And Preparing; Unpacking - LG PN45 series Owner's Manual

8
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
NOTE
y Image shown may differ from your TV.
y Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
y The available menus and options may differ from the input source or product model that you are using.
y New features may be added to this TV in the future.
y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned
off if it will not be watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced,
and this will reduce the overall running cost.

INSTALLATION PROCEdURE

1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.

ASSEMBLING ANd PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
y Do not use any unapproved items to ensure the safety and product life span.
y Any damag or injuries caused by using unapproved items are not covered by the manufacturer's warranty.
y Some models have a thin film attached on to the screen and this must not be removed.
Remote control, batter- Owner's manual
ies (AAA)
(See p. 25, 26)
Ferrite core desk-mount Screw
(Depending on model) (Only 42PN45**)
(See p. 10) ( See p. 17 )