Impex Marcy Platinum GS 99 Owner's Manual page 18

STEP 10 (See Cable Loop Diagram & Diagram 10)
A.) Clip one end of the 106" Butterfly Cable (#38) to the slot on the Left Butterfly Adjustment
Frame. Draw the Cable through the slot then to the open left Swivel Pulley Bracket (#23).
B.) Attach a Pulley (#56) to the bracket. Secure it with one M10 x 1 ¾" Allen Bolt (#82), two
Washers (#99), and one M10 Aircraft Nut (#96).
C.) Draw the Cable around the Pulley then downward. Install a Pulley to the Angled Double
Floating Pulley Bracket (#24). Install another Pulley then let the Bracket hanging for now.
D.) Draw the Cable upward to the right Swivel Pulley Bracket. Install another Pulley.
E.) Draw the Cable to the Right Butterfly Adjustment Frame and secure the end of the cable to
the slot.
17
¾"
DIAGRAM 10