Table of Contents
Advertisement
Release the two locks located at either side of the connector cover at
the rear of the appliance.
Feed the mains lead through the cable clamp to prevent accidental
disconnection.
Tighten the cable clamp securely and close the connector cover.
Please note:
•
The mains cable must only be replaced by a qualified electrician
or service engineer and must be of equivalent or better rating (i.e.
2.5mm ² , HO5RR-F).
•
This appliance is intended to be connected to the mains supply with
a cable of cross section area 2.5 mm ² . A larger cable will not fit the
terminal connections.
•
The marking of the current rating of the fuse or circuit breaker
protecting this appliance should be marked on the socket outlet.
•
Assembly and electrical connection should be carried out by
specialised personnel.
•
When installing this product we recommend you seek the help of
another individual.
1. The wire which is coloured green and yellow must be connected to
the terminal marked E (Earth) or coloured Green.
2. The wire which is coloured blue must be connected to the terminal
marked N (Neutral), or coloured Black.
3. The wire which is coloured brown must be connected to the
terminal marked L (Live), or coloured Red.
31
Advertisement
Table of Contents
