•
Use the battery only with a charging system that is IEEE-Std-
1725 standard qualified. The use of an unqualified battery or
charger may lead to fire, explosion, leakage, or other hazards.
•
Replace the battery only with an IEEE-Std-1725 standard
qualified battery. The use of an unqualified battery may lead to
fire, explosion, leakage, or other hazards.
•
Do not disassemble or open, crush, bend or deform, puncture or
shred the battery. Otherwise, it may lead to electrolyte leakage,
overheating, fire, or explosion.
•
Do not solder battery poles or dismantle the battery. Doing so
may lead to electrolyte leakage, excessive heat, fire, or
explosion.
Cleaning and maintenance
•
Keep the device and accessories dry. Do not attempt to dry it
with an external heat source, such as a microwave oven or hair
dryer.
•
Do not expose your device or accessories to extreme heat or
cold. These environments may interfere with proper function and
may lead to fire or explosion.
•
Avoid collision, which may lead to device malfunctions,
overheating, fire, or explosion.
•
Before you clean or maintain the device, stop using it, stop all
applications, and disconnect all cables connected to it.
•
Do not use any chemical detergent, powder, or other chemical
agents (such as alcohol and benzene) to clean the device or
accessories. These substances may cause damage to parts or
present a fire hazard. Use a clean, soft, and dry cloth to clean the
device and accessories.
•
Do not place magnetic stripe cards, such as credit cards and
phone cards, near the device for extended periods of time.
Otherwise the magnetic stripe cards may be damaged.
19